Powertrain








Powertrain of a modern automobile, comprising engine (with exhaust system), transmission, drive shaft, suspension and the wheels.


In a motor vehicle, the term powertrain or powerplant describes the main components that generate power and deliver it to the road surface, water, or air. This includes the engine, transmission, drive shafts, differentials, and the final drive (drive wheels, continuous track as in military tanks or caterpillar tractors, propeller, etc.). More recently in hybrid powertrains the battery, the electric motor and the control algorithm are also seen as elements of the powertrain.


A motor vehicle's driveline or drivetrain consists of the parts of the powertrain excluding the engine. It is the portion of a vehicle, after the prime mover, that changes depending on whether a vehicle is front-wheel, rear-wheel, or four-wheel drive, or less-common six-wheel or eight-wheel drive.


In a wider sense, the powertrain includes all of its components used to transform stored (chemical, solar, nuclear, kinetic, potential, etc.) energy into kinetic energy for propulsion purposes. This includes the utilization of multiple power sources and non–wheel-based vehicles.




Contents






  • 1 Developments


  • 2 Manufacturing


  • 3 Frames and powertrains


  • 4 Final drive


  • 5 See also


  • 6 References


  • 7 External links





Developments


The most recent developments in powertrain are driven by the electrification of it in multiple components. Electrical energy needs to be provided, usually this leads to larger batteries. Electrical engines can be found as isolated component or as part of other elements, e.g. the axle. In hybrid powertrains the torque generated by the combustion engine and the electric motor have to be brought together and distributed to the wheels. The control of this process can be quite involved but the rewards are greatly improved acceleration and much lower emissions.


Powertrain development for diesel engines involves the following: exhaust gas recirculation (EGR), and advanced combustion. Spark ignition engine development include: fuel injection, including the gasoline direct injection variant, as well as improving volumetric efficiency by using multi-valves per cylinder, variable valve timing, variable length intake manifolds, and turbocharging. Changes also include new fuel qualities (no sulphur or aromates) to allow new combustion concepts. So-called "combined combustion systems" (CCV) or "diesotto" cycles are based on synthetic fuels (synthetic diesel, biomass to liquid (BTL) or gas to liquid (GTL)).[1]


BEVs, FCEVs and PHEV powertrains are expected to reach parity with ICE powertrains in 2025.[2]



Manufacturing


The manufacturing of powertrain components and systems is important to industry, including the automotive and other vehicle sectors. Competitiveness drives companies to engineer and produce powertrain systems that over time are more economical to manufacture, higher in product quality and reliability, higher in performance, more fuel efficient, less polluting, and longer in life expectancy. In turn these requirements have led to designs involving higher internal pressures, greater instantaneous forces, and increased complexity of design and mechanical operation. The resulting designs in turn impose significantly more severe requirements on parts shape and dimension; and material surface flatness, waviness, roughness, and porosity. Quality control over these parameters is achieved through metrology technology applied to all of the steps in powertrain manufacturing processes.



Frames and powertrains


In automotive manufacturing, the frame plus the "running gear" makes the chassis.


Later, a body (sometimes referred to as "coachwork"), which is usually not necessary for integrity of the structure, is built on the chassis to complete the vehicle. Commercial vehicle manufacturers may have "chassis only" and "cowl and chassis" versions that can be outfitted with specialized bodies. These include buses, motor homes, fire engines, ambulances, etc.


The frame plus the body makes a glider (a vehicle without a powertrain).



Final drive




A cutaway view of an automotive final drive unit, which contains the differential


The final drive is the last in the set of components which delivers torque to the drive wheels. In a road vehicle, it incorporates the differential. In a railway vehicle, it sometimes incorporates the reversing gear. Examples include the Self-Changing Gears RF 28 (used in many first-generation diesel multiple units of British Railways)[3] and RF 11 used in the British Rail Class 03 and British Rail Class 04 diesel shunting locomotives.



See also











  • Car safety

  • Electric vehicle

  • Electric vehicle conversion

  • Giubo

  • Gear train

  • Hybrid vehicle drivetrain



References




  1. ^ Mercedes plans petrol/diesel hybrid


  2. ^ McKinsey - A portfolio of power-trains for Europe


  3. ^ Mann, R. H., Diesel Rail-Cars, Draughtsmens and Allied Technicians Association, 1964, pp 45–50



External links




  • New powertrain technologies conference, 27 and 28- March-2007.

  • http://www.caradvice.com.au/105/car-frame-chassis/


  • Honda F1 Race Car Frame.

  • Drivetrain Quiz

  • HIL Test Bench (Delphi Motor) Technical Paper: A Closed-Loop Drive-train Model









Popular posts from this blog

Eastern Orthodox Church

Zagreb

Understanding the information contained in the Deep Space Network XML data?