What do you do if the hole in the tile is larger than the shower faucet escutcheon?
Whoever built this shower stall really made a hack job of the hole for the shower faucet. The hole is actually just a bit larger than the escutcheon on the upper right corner. One option is to just caulk the heck out of it and hope for the best. Is there a better approach?
shower tile
asked 5 hours ago
S Canada
62
add a comment |
Whoever built this shower stall really made a hack job of the hole for the shower faucet. The hole is actually just a bit larger than the escutcheon on the upper right corner. One option is to just caulk the heck out of it and hope for the best. Is there a better approach?
shower tile
asked 5 hours ago
S Canada
62
add a comment |
Whoever built this shower stall really made a hack job of the hole for the shower faucet. The hole is actually just a bit larger than the escutcheon on the upper right corner. One option is to just caulk the heck out of it and hope for the best. Is there a better approach?
shower tile
asked 5 hours ago
S Canada
62
Whoever built this shower stall really made a hack job of the hole for the shower faucet. The hole is actually just a bit larger than the escutcheon on the upper right corner. One option is to just caulk the heck out of it and hope for the best. Is there a better approach?
shower tile
shower tile
asked 5 hours ago
S Canada
62
asked 5 hours ago
S Canada
62
asked 5 hours ago
S Canada
62
asked 5 hours ago
S Canada
62
asked 5 hours ago
S Canada
62
62
add a comment |
add a comment |
3 Answers
3
active
oldest
votes
Some vendors offer over sized escutcheons for this purpose. I found one available from Symmons. It was for their shower faucet, but I used it on a Moen. It's just a matter of how it is mounted.
answered 5 hours ago
J. Raefield
2,40817
add a comment |
I see several possible options.
- Find a flat round chrome plate piece that is larger diameter than your escutcheon. Cut a hole in it to fit around the projection part of the faucet and secure it against the wall behind the escutcheon. seal around the edge with clear silicone.
- Similar to above but make your own ring from some brass sheet material. Polish it up and apply a clear lacquer to the surface to seal it. Then install as above.
- Remove the tile with the over aggressive cutout and replace with another that has less cutout. This works if there was spare tile left at the site after the original job was completed or if the tile is easy to source.
answered 5 hours ago
Michael Karas♦
43.5k43482
add a comment |
... and one of them is cracked. Either re-do those two tiles, or:
Shove some backing (newspaper, paper towel, w/e) in there and get a little grout to shore-up those exposed corners. DO NOT fill the area entirely with grout. Seal it, put escussion, and caulk. A picture with the escussion on would tell me if you can get away with that (looking at the old outline tells me it's a no-brainer).
answered 15 mins ago
Mazura
10.2k11246
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "73"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fdiy.stackexchange.com%2fquestions%2f154017%2fwhat-do-you-do-if-the-hole-in-the-tile-is-larger-than-the-shower-faucet-escutche%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
3 Answers
3
active
oldest
votes
3 Answers
3
active
oldest
votes
active
oldest
votes
active
oldest
votes
Some vendors offer over sized escutcheons for this purpose. I found one available from Symmons. It was for their shower faucet, but I used it on a Moen. It's just a matter of how it is mounted.
answered 5 hours ago
J. Raefield
2,40817
add a comment |
Some vendors offer over sized escutcheons for this purpose. I found one available from Symmons. It was for their shower faucet, but I used it on a Moen. It's just a matter of how it is mounted.
answered 5 hours ago
J. Raefield
2,40817
add a comment |
Some vendors offer over sized escutcheons for this purpose. I found one available from Symmons. It was for their shower faucet, but I used it on a Moen. It's just a matter of how it is mounted.
answered 5 hours ago
J. Raefield
2,40817
Some vendors offer over sized escutcheons for this purpose. I found one available from Symmons. It was for their shower faucet, but I used it on a Moen. It's just a matter of how it is mounted.
answered 5 hours ago
J. Raefield
2,40817
answered 5 hours ago
J. Raefield
2,40817
answered 5 hours ago
J. Raefield
2,40817
answered 5 hours ago
J. Raefield
2,40817
2,40817
add a comment |
add a comment |
I see several possible options.
- Find a flat round chrome plate piece that is larger diameter than your escutcheon. Cut a hole in it to fit around the projection part of the faucet and secure it against the wall behind the escutcheon. seal around the edge with clear silicone.
- Similar to above but make your own ring from some brass sheet material. Polish it up and apply a clear lacquer to the surface to seal it. Then install as above.
- Remove the tile with the over aggressive cutout and replace with another that has less cutout. This works if there was spare tile left at the site after the original job was completed or if the tile is easy to source.
answered 5 hours ago
Michael Karas♦
43.5k43482
add a comment |
I see several possible options.
- Find a flat round chrome plate piece that is larger diameter than your escutcheon. Cut a hole in it to fit around the projection part of the faucet and secure it against the wall behind the escutcheon. seal around the edge with clear silicone.
- Similar to above but make your own ring from some brass sheet material. Polish it up and apply a clear lacquer to the surface to seal it. Then install as above.
- Remove the tile with the over aggressive cutout and replace with another that has less cutout. This works if there was spare tile left at the site after the original job was completed or if the tile is easy to source.
answered 5 hours ago
Michael Karas♦
43.5k43482
add a comment |
I see several possible options.
- Find a flat round chrome plate piece that is larger diameter than your escutcheon. Cut a hole in it to fit around the projection part of the faucet and secure it against the wall behind the escutcheon. seal around the edge with clear silicone.
- Similar to above but make your own ring from some brass sheet material. Polish it up and apply a clear lacquer to the surface to seal it. Then install as above.
- Remove the tile with the over aggressive cutout and replace with another that has less cutout. This works if there was spare tile left at the site after the original job was completed or if the tile is easy to source.
answered 5 hours ago
Michael Karas♦
43.5k43482
I see several possible options.
- Find a flat round chrome plate piece that is larger diameter than your escutcheon. Cut a hole in it to fit around the projection part of the faucet and secure it against the wall behind the escutcheon. seal around the edge with clear silicone.
- Similar to above but make your own ring from some brass sheet material. Polish it up and apply a clear lacquer to the surface to seal it. Then install as above.
- Remove the tile with the over aggressive cutout and replace with another that has less cutout. This works if there was spare tile left at the site after the original job was completed or if the tile is easy to source.
answered 5 hours ago
Michael Karas♦
43.5k43482
answered 5 hours ago
Michael Karas♦
43.5k43482
answered 5 hours ago
Michael Karas♦
43.5k43482
answered 5 hours ago
Michael Karas♦
43.5k43482
43.5k43482
add a comment |
add a comment |
... and one of them is cracked. Either re-do those two tiles, or:
Shove some backing (newspaper, paper towel, w/e) in there and get a little grout to shore-up those exposed corners. DO NOT fill the area entirely with grout. Seal it, put escussion, and caulk. A picture with the escussion on would tell me if you can get away with that (looking at the old outline tells me it's a no-brainer).
answered 15 mins ago
Mazura
10.2k11246
add a comment |
... and one of them is cracked. Either re-do those two tiles, or:
Shove some backing (newspaper, paper towel, w/e) in there and get a little grout to shore-up those exposed corners. DO NOT fill the area entirely with grout. Seal it, put escussion, and caulk. A picture with the escussion on would tell me if you can get away with that (looking at the old outline tells me it's a no-brainer).
answered 15 mins ago
Mazura
10.2k11246
add a comment |
... and one of them is cracked. Either re-do those two tiles, or:
Shove some backing (newspaper, paper towel, w/e) in there and get a little grout to shore-up those exposed corners. DO NOT fill the area entirely with grout. Seal it, put escussion, and caulk. A picture with the escussion on would tell me if you can get away with that (looking at the old outline tells me it's a no-brainer).
answered 15 mins ago
Mazura
10.2k11246
... and one of them is cracked. Either re-do those two tiles, or:
Shove some backing (newspaper, paper towel, w/e) in there and get a little grout to shore-up those exposed corners. DO NOT fill the area entirely with grout. Seal it, put escussion, and caulk. A picture with the escussion on would tell me if you can get away with that (looking at the old outline tells me it's a no-brainer).
answered 15 mins ago
Mazura
10.2k11246
answered 15 mins ago
Mazura
10.2k11246
answered 15 mins ago
Mazura
10.2k11246
answered 15 mins ago
Mazura
10.2k11246
10.2k11246
add a comment |
add a comment |
Thanks for contributing an answer to Home Improvement Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fdiy.stackexchange.com%2fquestions%2f154017%2fwhat-do-you-do-if-the-hole-in-the-tile-is-larger-than-the-shower-faucet-escutche%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
