Ykhjuy

Cotton
History
Terminology
Cash crop Commodity Cottonopolis Cotton Belt Cotton diplomacy King Cotton
Types
Gossypium hirsutum Gossypium barbadense Gossypium arboreum Gossypium herbaceum
Production
Cotton-spinning machinery Cotton gin Cotton mill Cotton picker Mercerised cotton Spinning jenny Spinning mule Spinning wheel Water frame
Fabric
Cambric Chino Corduroy Denim Seersucker Terrycloth
v t e

Manually decontaminating cotton before processing at an Indian spinning mill (2010)

Cotton is a soft, fluffy staple fiber that grows in a boll, or protective case, around the seeds of the cotton plants of the genus Gossypium in the mallow family Malvaceae. The fiber is almost pure cellulose. Under natural conditions, the cotton bolls will increase the dispersal of the seeds.

The plant is a shrub native to tropical and subtropical regions around the world, including the Americas, Africa, Egypt and India. The greatest diversity of wild cotton species is found in Mexico, followed by Australia and Africa.^[1] Cotton was independently domesticated in the Old and New Worlds.

The fiber is most often spun into yarn or thread and used to make a soft, breathable textile. The use of cotton for fabric is known to date to prehistoric times; fragments of cotton fabric dated to the fifth millennium BC have been found in the Indus Valley Civilization.
Although cultivated since antiquity, it was the invention of the cotton gin that lowered the cost of production that led to its widespread use, and it is the most widely used natural fiber cloth in clothing today.

Current estimates for world production are about 25 million tonnes or 110 million bales annually, accounting for 2.5% of the world's arable land. China is the world's largest producer of cotton, but most of this is used domestically. The United States has been the largest exporter for many years.^[2] In the United States, cotton is usually measured in bales, which measure approximately 0.48 cubic meters (17 cubic feet) and weigh 226.8 kilograms (500 pounds).^[3]

Types

There are four commercially grown species of cotton, all domesticated in antiquity:

• 
  Gossypium hirsutum – upland cotton, native to Central America, Mexico, the Caribbean and southern Florida (90% of world production)


• 
  Gossypium barbadense – known as extra-long staple cotton, native to tropical South America (8% of world production)


• 
  Gossypium arboreum – tree cotton, native to India and Pakistan (less than 2%)


• 
  Gossypium herbaceum – Levant cotton, native to southern Africa and the Arabian Peninsula (less than 2%)

The two New World cotton species account for the vast majority of modern cotton production, but the two Old World species were widely used before the 1900s. While cotton fibers occur naturally in colors of white, brown, pink and green, fears of contaminating the genetics of white cotton have led many cotton-growing locations to ban the growing of colored cotton varieties.

History

Early history

Indian subcontinent

Indus Valley Civilization, Early Phase (3300-2600 BC)

The earliest evidence of cotton use in the Indian subcontinent has been found at the site of Mehrgarh and Rakhigarhi where cotton threads have been found preserved in copper beads; these finds have been dated to the Neolithic (5th millennium BC).^[4][5] Cotton cultivation in the region is dated to the Indus Valley Civilization, which covered parts of modern eastern Pakistan and northwestern India between 3300 and 1300 BC.^[6] The Indus cotton industry was well-developed and some methods used in cotton spinning and fabrication continued to be used until the industrialization of India.^[7] Between 2000 and 1000 BC cotton became widespread across much of India.^[8] For example, it has been found at the site of Hallus in Karnataka dating from around 1000 BC.^[9]

Americas

Cotton bolls discovered in a cave near Tehuacán, Mexico, have at first been
dated to as early as 5500 BC, but this date has been challenged.^[10] More securely dated is the domestication of Gossypium hirsutum in Mexico between around 3400 and 2300 BC.^[11]

In Peru, cultivation of the indigenous cotton species Gossypium barbadense has been dated, from a find in Ancon, to c 4200 BC,^[12] and was the backbone of the development of coastal cultures such as the Norte Chico, Moche, and Nazca. Cotton was grown upriver, made into nets, and traded with fishing villages along the coast for large supplies of fish. The Spanish who came to Mexico and Peru in the early 16th century found the people growing cotton and wearing clothing made of it.

Arabia

The Greeks and the Arabs were not familiar with cotton until the Wars of Alexander the Great, as his contemporary Megasthenes told Seleucus I Nicator of "there being trees on which wool grows" in "Indica".^{[citation needed]} This may be a reference to "tree cotton", Gossypium arboreum, which is a native of the Indian subcontinent.

According to the Columbia Encyclopedia:^[9]

Cotton has been spun, woven, and dyed since prehistoric times. It clothed the people of ancient India, Egypt, and China. Hundreds of years before the Christian era, cotton textiles were woven in India with matchless skill, and their use spread to the Mediterranean countries.

Iran

In Iran (Persia), the history of cotton dates back to the Achaemenid era (5th century BC); however, there are few sources about the planting of cotton in pre-Islamic Iran. The planting of cotton was common in Merv, Ray and Pars of Iran. In Persian poets' poems, especially Ferdowsi's Shahname, there are references to cotton ("panbe" in Persian). Marco Polo (13th century) refers to the major products of Persia, including cotton. John Chardin, a French traveler of the 17th century who visited Safavid Persia, spoke approvingly of the vast cotton farms of Persia.^[13]

China

During the Han dynasty (207 BC - 220 AD), cotton was grown by Chinese peoples in the southern Chinese province of Yunnan.^[14]

Middle Ages

Eastern world

Egyptians grew and spun cotton in the first seven centuries of the Christian era.^[15]

Handheld roller cotton gins had been used in India since the 6th century, and was then introduced to other countries from there.^[16] Between the 12th and 14th centuries, dual-roller gins appeared in India and China. The Indian version of the dual-roller gin was prevalent throughout the Mediterranean cotton trade by the 16th century. This mechanical device was, in some areas, driven by water power.^[17]

The spinning wheel was invented in India, between 500 and 1000 AD.^[18] The earliest clear illustrations of the spinning wheel come from the Islamic world in the eleventh century.^[19]

Europe

Cotton plants as imagined and drawn by John Mandeville in the 14th century

During the late medieval period, cotton became known as an imported fiber in northern Europe, without any knowledge of how it was derived, other than that it was a plant. Because Herodotus had written in his Histories, Book III, 106, that in India trees grew in the wild producing wool, it was assumed that the plant was a tree, rather than a shrub. This aspect is retained in the name for cotton in several Germanic languages, such as German Baumwolle, which translates as "tree wool" (Baum means "tree"; Wolle means "wool"). Noting its similarities to wool, people in the region could only imagine that cotton must be produced by plant-borne sheep. John Mandeville, writing in 1350, stated as fact that "There grew there [India] a wonderful tree which bore tiny lambs on the endes of its branches. These branches were so pliable that they bent down to allow the lambs to feed when they are hungry." (See Vegetable Lamb of Tartary.)

The Vegetable Lamb of Tartary

Cotton manufacture was introduced to Europe during the Muslim conquest of the Iberian Peninsula and Sicily. The knowledge of cotton weaving was spread to northern Italy in the 12th century, when Sicily was conquered by the Normans, and consequently to the rest of Europe. The spinning wheel, introduced to Europe circa 1350, improved the speed of cotton spinning.^[20] By the 15th century, Venice, Antwerp, and Haarlem were important ports for cotton trade, and the sale and transportation of cotton fabrics had become very profitable.^[21]

Early modern period

Mughal India

A woman in Dhaka clad in fine Bengali muslin, 18th century.

Under the Mughal Empire, which ruled in the Indian subcontinent from the early 16th century to the early 18th century, Indian cotton production increased, in terms of both raw cotton and cotton textiles. The Mughals introduced agrarian reforms such as a new revenue system that was biased in favour of higher value cash crops such as cotton and indigo, providing state incentives to grow cash crops, in addition to rising market demand.^[22]

The largest manufacturing industry in the Mughal Empire was cotton textile manufacturing, which included the production of piece goods, calicos, and muslins, available unbleached and in a variety of colours. The cotton textile industry was responsible for a large part of the empire's international trade.^[23] India had a 25% share of the global textile trade in the early 18th century.^[24] Indian cotton textiles were the most important manufactured goods in world trade in the 18th century, consumed across the world from the Americas to Japan.^[25] The most important center of cotton production was the Bengal Subah province, particularly around its capital city of Dhaka.^[26]

The worm gear roller cotton gin, which was invented in India during the early Delhi Sultanate era of the 13th–14th centuries, came into use in the Mughal Empire some time around the 16th century,^[27] and is still used in India through to the present day.^[16] Another innovation, the incorporation of the crank handle in the cotton gin, first appeared in India some time during the late Delhi Sultanate or the early Mughal Empire.^[28] The production of cotton, which may have largely been spun in the villages and then taken to towns in the form of yarn to be woven into cloth textiles, was advanced by the diffusion of the spinning wheel across India shortly before the Mughal era, lowering the costs of yarn and helping to increase demand for cotton. The diffusion of the spinning wheel, and the incorporation of the worm gear and crank handle into the roller cotton gin, led to greatly expanded Indian cotton textile production during the Mughal era.^[29]

It was reported that, with an Indian cotton gin, which is half machine and half tool, one man and one woman could clean 28 pounds of cotton per day. With a modified Forbes version, one man and a boy could produce 250 pounds per day. If oxen were used to power 16 of these machines, and a few people's labour was used to feed them, they could produce as much work as 750 people did formerly.^[30]

Egypt

In the early 19th century, a Frenchman named M. Jumel proposed to the great ruler of Egypt, Mohamed Ali Pasha, that he could earn a substantial income by growing an extra-long staple Maho (Gossypium barbadense) cotton, in Lower Egypt, for the French market. Mohamed Ali Pasha accepted the proposition and granted himself the monopoly on the sale and export of cotton in Egypt; and later dictated cotton should be grown in preference to other crops.

Egypt under Muhammad Ali in the early 19th century had the fifth most productive cotton industry in the world, in terms of the number of spindles per capita.^[31] The industry was initially driven by machinery that relied on traditional energy sources, such as animal power, water wheels, and windmills, which were also the principal energy sources in Western Europe up until around 1870.^[32] It was under Muhammad Ali in the early 19th century that steam engines were introduced to the Egyptian cotton industry.^[32]

By the time of the American Civil war annual exports had reached $16 million (120,000 bales), which rose to $56 million by 1864, primarily due to the loss of the Confederate supply on the world market. Exports continued to grow even after the reintroduction of US cotton, produced now by a paid workforce, and Egyptian exports reached 1.2 million bales a year by 1903.

Britain

East India Company

The English East India Company introduced the Britain to cheap calico and chintz cloth on the restoration of the monarchy in the 1660s. Initially imported as a novelty side line, from its spice trading posts in Asia, the cheap colourful cloth proved popular and overtook the EIC's spice trade by value in the late 17th century. The EIC embraced the demand, particularly for calico, by expanding its factories in Asia and producing and importing cloth in bulk, creating competition for domestic woollen and linen textile producers. The impacted weavers, spinners, dyers, shepherds and farmers objected and the calico question became one of the major issues of National politics between the 1680s and the 1730s. Parliament began to see a decline in domestic textile sales, and an increase in imported textiles from places like China and India. Seeing the East India Company and their textile importation as a threat to domestic textile businesses, Parliament passed the 1700 Calico Act, blocking the importation of cotton cloth. As there was no punishment for continuing to sell cotton cloth, smuggling of the popular material became commonplace. In 1721, dissatisfied with the results of the first act, Parliament passed a stricter addition, this time prohibiting the sale of most cottons, imported and domestic (exempting only thread Fustian and raw cotton). The exemption of raw cotton from the prohibition initially saw 2 thousand bales of cotton imported annually, to become the basis of a new indigenous industry, initially producing Fustian for the domestic market, though more importantly triggering the development of a series of mechanised spinning and weaving technologies, to process the material. This mechanised production was concentrated in new cotton mills, which slowly expanded till by the beginning of the 1770s seven thousand bales of cotton were imported annually, and pressure was put on Parliament, by the new mill owners, to remove the prohibition on the production and sale of pure cotton cloth, as they could easily compete with anything the EIC could import.

The acts were repealed in 1774, triggering a wave of investment in mill based cotton spinning and production, doubling the demand for raw cotton within a couple of years, and doubling it again every decade, into the 1840s^[33]

Indian cotton textiles, particularly those from Bengal, continued to maintain a competitive advantage up until the 19th century. In order to compete with India, Britain invested in labour-saving technical progress, while implementing protectionist policies such as bans and tariffs to restrict Indian imports.^[34] At the same time, the East India Company's rule in India contributed to its deindustrialization, opening up a new market for British goods,^[34] while the capital amassed from Bengal after its 1757 conquest was used to invest in British industries such as textile manufacturing and greatly increase British wealth.^[35][36][37] British colonization also forced open the large Indian market to British goods, which could be sold in India without tariffs or duties, compared to local Indian producers who were heavily taxed, while raw cotton was imported from India without tariffs to British factories which manufactured textiles from Indian cotton, giving Britain a monopoly over India's large market and cotton resources.^[38][34][39] India served as both a significant supplier of raw goods to British manufacturers and a large captive market for British manufactured goods.^[40] Britain eventually surpassed India as the world's leading cotton textile manufacturer in the 19th century.^[34]

India's cotton-processing sector changed during EIC expansion in India in the late 18th and early 19th centuries. From focusing on supplying the British market to supplying East Asia with raw cotton. As the Artisan produced textiles were no longer competitive with those produced Industrially, and Europe preferring the cheaper slave produced, long staple American, and Egyptian cottons, for its own materials.^{[citation needed]}

Industrial Revolution

The advent of the Industrial Revolution in Britain provided a great boost to cotton manufacture, as textiles emerged as Britain's leading export. In 1738, Lewis Paul and John Wyatt, of Birmingham, England, patented the roller spinning machine, as well as the flyer-and-bobbin system for drawing cotton to a more even thickness using two sets of rollers that traveled at different speeds. Later, the invention of the James Hargreaves' spinning jenny in 1764, Richard Arkwright's spinning frame in 1769 and Samuel Crompton's spinning mule in 1775 enabled British spinners to produce cotton yarn at much higher rates. From the late 18th century on, the British city of Manchester acquired the nickname "Cottonopolis" due to the cotton industry's omnipresence within the city, and Manchester's role as the heart of the global cotton trade.

Production capacity in Britain and the United States was improved by the invention of the modern cotton gin by the American Eli Whitney in 1793. Before the development of cotton gins, the cotton fibers had to be pulled from the seeds tediously by hand. By the late 1700s, a number of crude ginning machines had been developed. However, to produce a bale of cotton required over 600 hours of human labor,^[41] making large-scale production uneconomical in the United States, even with the use of humans as slave labor. The gin that Whitney manufactured (the Holmes design) reduced the hours down to just a dozen or so per bale. Although Whitney patented his own design for a cotton gin, he manufactured a prior design from Henry Odgen Holmes, for which Holmes filed a patent in 1796.^[41] Improving technology and increasing control of world markets allowed British traders to develop a commercial chain in which raw cotton fibers were (at first) purchased from colonial plantations, processed into cotton cloth in the mills of Lancashire, and then exported on British ships to captive colonial markets in West Africa, India, and China (via Shanghai and Hong Kong).

By the 1840s, India was no longer capable of supplying the vast quantities of cotton fibers needed by mechanized British factories, while shipping bulky, low-price cotton from India to Britain was time-consuming and expensive. This, coupled with the emergence of American cotton as a superior type (due to the longer, stronger fibers of the two domesticated Native American species, Gossypium hirsutum and Gossypium barbadense), encouraged British traders to purchase cotton from plantations in the United States and plantations in the Caribbean. By the mid-19th century, "King Cotton" had become the backbone of the southern American economy. In the United States, cultivating and harvesting cotton became the leading occupation of slaves.

During the American Civil War, American cotton exports slumped due to a Union blockade on Southern ports, and also because of a strategic decision by the Confederate government to cut exports, hoping to force Britain to recognize the Confederacy or enter the war. This prompted the main purchasers of cotton, Britain and France, to turn to Egyptian cotton. British and French traders invested heavily in cotton plantations. The Egyptian government of Viceroy Isma'il took out substantial loans from European bankers and stock exchanges. After the American Civil War ended in 1865, British and French traders abandoned Egyptian cotton and returned to cheap American exports,^{[citation needed]} sending Egypt into a deficit spiral that led to the country declaring bankruptcy in 1876, a key factor behind Egypt's occupation by the British Empire in 1882.

During this time, cotton cultivation in the British Empire, especially Australia and India, greatly increased to replace the lost production of the American South. Through tariffs and other restrictions, the British government discouraged the production of cotton cloth in India; rather, the raw fiber was sent to England for processing. The Indian Mahatma Gandhi described the process:

1. English people buy Indian cotton in the field, picked by Indian labor at seven cents a day, through an optional monopoly.


2. This cotton is shipped on British ships, a three-week journey across the Indian Ocean, down the Red Sea, across the Mediterranean, through Gibraltar, across the Bay of Biscay and the Atlantic Ocean to London. One hundred per cent profit on this freight is regarded as small.


3. The cotton is turned into cloth in Lancashire. You pay shilling wages instead of Indian pennies to your workers. The English worker not only has the advantage of better wages, but the steel companies of England get the profit of building the factories and machines. Wages; profits; all these are spent in England.


4. The finished product is sent back to India at European shipping rates, once again on British ships. The captains, officers, sailors of these ships, whose wages must be paid, are English. The only Indians who profit are a few lascars who do the dirty work on the boats for a few cents a day.


5. The cloth is finally sold back to the kings and landlords of India who got the money to buy this expensive cloth out of the poor peasants of India who worked at seven cents a day.^[42]
   

United States

Prisoners farming cotton under the trusty system in Parchman Farm, Mississippi, 1911

In the United States, Southern cotton provided capital for the continuing development of the North. The cotton was largely produced through the labor of enslaved African Americans. It enriched both the Southern landowners and the Northern merchants. Much of the Southern cotton was trans-shipped through northern ports. In this era the slogan "Cotton is king" characterized the attitude of the South toward this monocrop.

Cotton remained a key crop in the Southern economy after emancipation and the end of the Civil War in 1865. Across the South, sharecropping evolved, in which landless black and white farmers worked land owned by others in return for a share of the profits. Some farmers rented the land and bore the production costs themselves. Until mechanical cotton pickers were developed, cotton farmers needed additional labor to hand-pick cotton. Picking cotton was a source of income for families across the South. Rural and small town school systems had split vacations so children could work in the fields during "cotton-picking."

It was not until the 1950s that reliable harvesting machinery was introduced (prior to this, cotton-harvesting machinery had been too clumsy to pick cotton without shredding the fibers).^{[citation needed]} During the first half of the 20th century, employment in the cotton industry fell, as machines began to replace laborers and the South's rural labor force dwindled during the World Wars.

Cotton remains a major export of the southern United States, and a majority of the world's annual cotton crop is of the long-staple American variety.^[43]

Cultivation

Cotton Field at Singalandapuram, Rasipuram, India (2017)

Cotton field

Cotton plant

A cotton field, late in the season

Cotton plowing in Togo, 1928

Picking cotton in Armenia in the 1930s. No cotton is grown there today.

Cotton ready for shipment, Houston, Texas (postcard, circa 1911)

Cotton modules in Australia (2007)

Successful cultivation of cotton requires a long frost-free period, plenty of sunshine, and a moderate rainfall, usually from 60 to 120 cm (24 to 47 in)^{[citation needed]}. Soils usually need to be fairly heavy, although the level of nutrients does not need to be exceptional. In general, these conditions are met within the seasonally dry tropics and subtropics in the Northern and Southern hemispheres, but a large proportion of the cotton grown today is cultivated in areas with less rainfall that obtain the water from irrigation. Production of the crop for a given year usually starts soon after harvesting the preceding autumn. Cotton is naturally a perennial but is grown as an annual to help control pests.^[44] Planting time in spring in the Northern hemisphere varies from the beginning of February to the beginning of June. The area of the United States known as the South Plains is the largest contiguous cotton-growing region in the world. While dryland (non-irrigated) cotton is successfully grown in this region, consistent yields are only produced with heavy reliance on irrigation water drawn from the Ogallala Aquifer.
Since cotton is somewhat salt and drought tolerant, this makes it an attractive crop for arid and semiarid regions. As water resources get tighter around the world, economies that rely on it face difficulties and conflict, as well as potential environmental problems.^{[45][46][47][48][49]} For example, improper cropping and irrigation practices have led to desertification in areas of Uzbekistan, where cotton is a major export. In the days of the Soviet Union, the Aral Sea was tapped for agricultural irrigation, largely of cotton, and now salination is widespread.^[48][49]

Cotton can also be cultivated to have colors other than the yellowish off-white typical of modern commercial cotton fibers. Naturally colored cotton can come in red, green, and several shades of brown.^[50]

Genetic modification

Genetically modified (GM) cotton was developed to reduce the heavy reliance on pesticides. The bacterium Bacillus thuringiensis (Bt) naturally produces a chemical harmful only to a small fraction of insects, most notably the larvae of moths and butterflies, beetles, and flies, and harmless to other forms of life.^[51][52][53] The gene coding for Bt toxin has been inserted into cotton, causing cotton, called Bt cotton, to produce this natural insecticide in its tissues. In many regions, the main pests in commercial cotton are lepidopteran larvae, which are killed by the Bt protein in the transgenic cotton they eat. This eliminates the need to use large amounts of broad-spectrum insecticides to kill lepidopteran pests (some of which have developed pyrethroid resistance). This spares natural insect predators in the farm ecology and further contributes to noninsecticide pest management.

But Bt cotton is ineffective against many cotton pests, however, such as plant bugs, stink bugs, and aphids; depending on circumstances it may still be desirable to use insecticides against these. A 2006 study done by Cornell researchers, the Center for Chinese Agricultural Policy and the Chinese Academy of Science on Bt cotton farming in China found that after seven years these secondary pests that were normally controlled by pesticide had increased, necessitating the use of pesticides at similar levels to non-Bt cotton and causing less profit for farmers because of the extra expense of GM seeds.^[54] However, a 2009 study by the Chinese Academy of Sciences, Stanford University and Rutgers University refuted this.^[55] They concluded that the GM cotton effectively controlled bollworm. The secondary pests were mostly miridae (plant bugs) whose increase was related to local temperature and rainfall and only continued to increase in half the villages studied. Moreover, the increase in insecticide use for the control of these secondary insects was far smaller than the reduction in total insecticide use due to Bt cotton adoption. A 2012 Chinese study concluded that Bt cotton halved the use of pesticides and doubled the level of ladybirds, lacewings and spiders.^[56][57] The International Service for the Acquisition of Agri-biotech Applications (ISAAA) said that, worldwide, GM cotton was planted on an area of 25 million hectares in 2011.^[58] This was 69% of the worldwide total area planted in cotton.

GM cotton acreage in India grew at a rapid rate, increasing from 50,000 hectares in 2002 to 10.6 million hectares in 2011. The total cotton area in India was 12.1 million hectares in 2011, so GM cotton was grown on 88% of the cotton area. This made India the country with the largest area of GM cotton in the world.^[58] A long-term study on the economic impacts of Bt cotton in India, published in the Journal PNAS in 2012, showed that Bt cotton has increased yields, profits, and living standards of smallholder farmers.^[59] The U.S. GM cotton crop was 4.0 million hectares in 2011 the second largest area in the world, the Chinese GM cotton crop was third largest by area with 3.9 million hectares and Pakistan had the fourth largest GM cotton crop area of 2.6 million hectares in 2011.^[58] The initial introduction of GM cotton proved to be a success in Australia – the yields were equivalent to the non-transgenic varieties and the crop used much less pesticide to produce (85% reduction).^[60] The subsequent introduction of a second variety of GM cotton led to increases in GM cotton production until 95% of the Australian cotton crop was GM in 2009^[61] making Australia the country with the fifth largest GM cotton crop in the world.^[58] Other GM cotton growing countries in 2011 were Argentina, Myanmar, Burkina Faso, Brazil, Mexico, Colombia, South Africa and Costa Rica.^[58]

Cotton has been genetically modified for resistance to glyphosate a broad-spectrum herbicide discovered by Monsanto which also sells some of the Bt cotton seeds to farmers. There are also a number of other cotton seed companies selling GM cotton around the world. About 62% of the GM cotton grown from 1996 to 2011 was insect resistant, 24% stacked product and 14% herbicide resistant.^[58]

Cotton has gossypol, a toxin that makes it inedible. However, scientists have silenced the gene that produces the toxin, making it a potential food crop.^[62] On October 17, 2018, the USDA deregulated GE low-gossypol cotton.^[63][64]

Organic production

Organic cotton is generally understood as cotton from plants not genetically modified and that is certified to be grown without the use of any synthetic agricultural chemicals, such as fertilizers or pesticides.^[65] Its production also promotes and enhances biodiversity and biological cycles.^[66] In the United States, organic cotton plantations are required to enforce the National Organic Program (NOP). This institution determines the allowed practices for pest control, growing, fertilizing, and handling of organic crops.^[67] As of 2007, 265,517 bales of organic cotton were produced in 24 countries, and worldwide production was growing at a rate of more than 50% per year.^[68]

Pests and weeds

Hoeing a cotton field to remove weeds, Greene County, Georgia, US, 1941

Female and nymph Cotton Harlequin Bug

The cotton industry relies heavily on chemicals, such as herbicides, fertilizers and insecticides, although a very small number of farmers are moving toward an organic model of production, and organic cotton products are now available for purchase at limited locations. These are popular for baby clothes and diapers. Under most definitions, organic products do not use genetic engineering. All natural cotton products are known to be both sustainable and hypoallergenic.

Historically, in North America, one of the most economically destructive pests in cotton production has been the boll weevil. Due to the US Department of Agriculture's highly successful Boll Weevil Eradication Program (BWEP), this pest has been eliminated from cotton in most of the United States. This program, along with the introduction of genetically engineered Bt cotton (which contains a bacterial gene that codes for a plant-produced protein that is toxic to a number of pests such as cotton bollworm and pink bollworm), has allowed a reduction in the use of synthetic insecticides.

Other significant global pests of cotton include the pink bollworm, Pectinophora gossypiella; the chili thrips, Scirtothrips dorsalis; the cotton seed bug, Oxycarenus hyalinipennis; the tarnish plant bug, Lygus lineolaris; and the fall armyworm, Spodoptera frugiperda, Xanthomonas citri subsp. malvacearum.

Harvesting

Offloading freshly harvested cotton into a module builder in Texas; previously built modules can be seen in the background

Cotton being picked by hand in India, 2005.

Most cotton in the United States, Europe and Australia is harvested mechanically, either by a cotton picker, a machine that removes the cotton from the boll without damaging the cotton plant, or by a cotton stripper, which strips the entire boll off the plant. Cotton strippers are used in regions where it is too windy to grow picker varieties of cotton, and usually after application of a chemical defoliant or the natural defoliation that occurs after a freeze. Cotton is a perennial crop in the tropics, and without defoliation or freezing, the plant will continue to grow.

Cotton continues to be picked by hand in developing countries.^[69]

Competition from synthetic fibers

The era of manufactured fibers began with the development of rayon in France in the 1890s. Rayon is derived from a natural cellulose and cannot be considered synthetic, but requires extensive processing in a manufacturing process, and led the less expensive replacement of more naturally derived materials. A succession of new synthetic fibers were introduced by the chemicals industry in the following decades. Acetate in fiber form was developed in 1924. Nylon, the first fiber synthesized entirely from petrochemicals, was introduced as a sewing thread by DuPont in 1936, followed by DuPont's acrylic in 1944. Some garments were created from fabrics based on these fibers, such as women's hosiery from nylon, but it was not until the introduction of polyester into the fiber marketplace in the early 1950s that the market for cotton came under threat.^[70] The rapid uptake of polyester garments in the 1960s caused economic hardship in cotton-exporting economies, especially in Central American countries, such as Nicaragua, where cotton production had boomed tenfold between 1950 and 1965 with the advent of cheap chemical pesticides. Cotton production recovered in the 1970s, but crashed to pre-1960 levels in the early 1990s.^[71]

Uses

Cotton is used to make a number of textile products. These include terrycloth for highly absorbent bath towels and robes; denim for blue jeans; cambric, popularly used in the manufacture of blue work shirts (from which we get the term "blue-collar"); and corduroy, seersucker, and cotton twill. Socks, underwear, and most T-shirts are made from cotton. Bed sheets often are made from cotton. Cotton also is used to make yarn used in crochet and knitting. Fabric also can be made from recycled or recovered cotton that otherwise would be thrown away during the spinning, weaving, or cutting process. While many fabrics are made completely of cotton, some materials blend cotton with other fibers, including rayon and synthetic fibers such as polyester. It can either be used in knitted or woven fabrics, as it can be blended with elastine to make a stretchier thread for knitted fabrics, and apparel such as stretch jeans. Cotton can be blended also with linen as Linen-cotton blends which give benefit of both plant materials which wrinkle resistant, lightweight, breathable and can keep heat more effectively than only linen. These blends are thinner and lighter, but stronger than only cotton.^[72]

In addition to the textile industry, cotton is used in fishing nets, coffee filters, tents, explosives manufacture (see nitrocellulose), cotton paper, and in bookbinding. The first Chinese paper was made of cotton fiber.^{[citation needed]}Fire hoses were once made of cotton.

The cottonseed which remains after the cotton is ginned is used to produce cottonseed oil, which, after refining, can be consumed by humans like any other vegetable oil. The cottonseed meal that is left generally is fed to ruminant livestock; the gossypol remaining in the meal is toxic to monogastric animals. Cottonseed hulls can be added to dairy cattle rations for roughage. During the American slavery period, cotton root bark was used in folk remedies as an abortifacient, that is, to induce a miscarriage. Gossypol was one of the many substances found in all parts of the cotton plant and it was described by the scientists as 'poisonous pigment'. It also appears to inhibit the development of sperm or even restrict the mobility of the sperm. Also, it is thought to interfere with the menstrual cycle by restricting the release of certain hormones.^[73]

Cotton linters are fine, silky fibers which adhere to the seeds of the cotton plant after ginning. These curly fibers typically are less than ¹⁄₈ inch (3.2 mm) long. The term also may apply to the longer textile fiber staple lint as well as the shorter fuzzy fibers from some upland species. Linters are traditionally used in the manufacture of paper and as a raw material in the manufacture of cellulose. In the UK, linters are referred to as "cotton wool". This can also be a refined product (absorbent cotton in U.S. usage) which has medical, cosmetic and many other practical uses. The first medical use of cotton wool was by Sampson Gamgee at the Queen's Hospital (later the General Hospital) in Birmingham, England.

Shiny cotton is a processed version of the fiber that can be made into cloth resembling satin for shirts and suits.^[74] However, it is hydrophobic (does not absorb water easily), which makes it unfit for use in bath and dish towels (although examples of these made from shiny cotton are seen).

Long staple (LS cotton) is cotton of a longer fibre length and therefore of higher quality, while Extra-long staple cotton (ELS cotton) has longer fibre length still and of even higher quality. The name "Egyptian cotton" is broadly associated high quality cottons and is often an LS or (less often) an ELS cotton.^[75] The American cotton variety Pima cotton is often compared to Egyptian cotton, as both are used in high quality bed sheets and other cotton products. While Pima cotton is often grown in the American southwest,^[76] the Pima name is now used by cotton-producing nations such as Peru, Australia and Israel.^[77] Not all products bearing the Pima name are made with the finest cotton: American-grown ELS Pima cotton is trademarked as Supima^® cotton.^[78]

Cotton in a tree

Cotton lisle is a finely-spun, tightly twisted type of cotton that is noted for being strong and durable. Lisle is composed of two strands that have each been twisted an extra twist per inch than ordinary yarns and combined to create a single thread. The yarn is spun so that it is compact and solid. This cotton is used mainly for underwear, stockings, and gloves. Colors applied to this yarn are noted for being more brilliant than colors applied to softer yarn. This type of thread was first made in the city of Lisle, France (now Lille), hence its name.^[79][80][81]

International trade

Worldwide cotton production

The largest producers of cotton, currently (2009), are China and India, with annual production of about 34 million bales and 33.4 million bales, respectively; most of this production is consumed by their respective textile industries. The largest exporters of raw cotton are the United States, with sales of $4.9 billion, and Africa, with sales of $2.1 billion. The total international trade is estimated to be $12 billion. Africa's share of the cotton trade has doubled since 1980. Neither area has a significant domestic textile industry, textile manufacturing having moved to developing nations in Eastern and South Asia such as India and China. In Africa, cotton is grown by numerous small holders. Dunavant Enterprises, based in Memphis, Tennessee, is the leading cotton broker in Africa, with hundreds of purchasing agents. It operates cotton gins in Uganda, Mozambique, and Zambia. In Zambia, it often offers loans for seed and expenses to the 180,000 small farmers who grow cotton for it, as well as advice on farming methods. Cargill also purchases cotton in Africa for export.

The 25,000 cotton growers in the United States are heavily subsidized at the rate of $2 billion per year although China now provides the highest overall level of cotton sector support.^[82] The future of these subsidies is uncertain and has led to anticipatory expansion of cotton brokers' operations in Africa. Dunavant expanded in Africa by buying out local operations. This is only possible in former British colonies and Mozambique; former French colonies continue to maintain tight monopolies, inherited from their former colonialist masters, on cotton purchases at low fixed prices.^[83]

Leading producer countries

Top 10 Cotton Producing Countries (in metric tonnes)
Rank	Country	2010	2012	2014
1	China	5,970,000	6,281,000	6,532,000
2	India	5,683,000	6,071,000	6,423,000
3	United States	3,941,700	3,412,550	3,553,000
4	Pakistan	1,869,000	2,312,000	2,308,000
5	Brazil	973,449	1,673,337	1,524,103
6	Uzbekistan	1,136,120	983,400	849,000
7	Turkey	816,705	754,600	697,000
8	Australia	386,800	473,497	501,000
9	Turkmenistan	230,000	295,000	210,000
10	Mexico	225,000	195,000	198,000
Source: UN Food & Agriculture Organization[84]

The five leading exporters of cotton in 2011 are (1) the United States, (2) India, (3) Brazil, (4) Australia, and (5) Uzbekistan. The largest nonproducing importers are Korea, Taiwan, Russia, and Japan.^[85]

In India, the states of Maharashtra (26.63%), Gujarat (17.96%) and Andhra Pradesh (13.75%) and also Madhya Pradesh are the leading cotton producing states,^[86] these states have a predominantly tropical wet and dry climate.

In the United States, the state of Texas led in total production as of 2004,^[87] while the state of California had the highest yield per acre.^[88]

Fair trade

Cotton is an enormously important commodity throughout the world. However, many farmers in developing countries receive a low price for their produce, or find it difficult to compete with developed countries.

This has led to an international dispute (see United States – Brazil cotton dispute):

On 27 September 2002, Brazil requested consultations with the US regarding prohibited and actionable subsidies provided to US producers, users and/or exporters of upland cotton, as well as legislation, regulations, statutory instruments and amendments thereto providing such subsidies (including export credits), grants, and any other assistance to the US producers, users and exporters of upland cotton.^[89]

On 8 September 2004, the Panel Report recommended that the United States "withdraw" export credit guarantees and payments to domestic users and exporters, and "take appropriate steps to remove the adverse effects or withdraw" the mandatory price-contingent subsidy measures.^[90]

While Brazil was fighting the US through the WTO's Dispute Settlement Mechanism against a heavily subsidized cotton industry, a group of four least-developed African countries – Benin, Burkina Faso, Chad, and Mali – also known as "Cotton-4" have been the leading protagonist for the reduction of US cotton subsidies through negotiations. The four introduced a "Sectoral Initiative in Favour of Cotton", presented by Burkina Faso's President Blaise Compaoré during the Trade Negotiations Committee on 10 June 2003.^[91]

In addition to concerns over subsidies, the cotton industries of some countries are criticized for employing child labor and damaging workers' health by exposure to pesticides used in production. The Environmental Justice Foundation has campaigned against the prevalent use of forced child and adult labor in cotton production in Uzbekistan, the world's third largest cotton exporter.^[92] The international production and trade situation has led to "fair trade" cotton clothing and footwear, joining a rapidly growing market for organic clothing, fair fashion or "ethical fashion". The fair trade system was initiated in 2005 with producers from Cameroon, Mali and Senegal.^[93]

Trade

A display from a British cotton manufacturer of items used in a cotton mill during the Industrial Revolution.

A bale of cotton on display at the Louisiana State Cotton Museum in Lake Providence in East Carroll Parish in northeastern Louisiana

Cotton is bought and sold by investors and price speculators as a tradable commodity on 2 different commodity exchanges in the United States of America.

• Cotton No. 2 futures contracts are traded on the New York Board of Trade (NYBOT) under the ticker symbol CT. They are delivered every year in March, May, July, October, and December.^[94]
  


• Cotton futures contracts are traded on the New York Mercantile Exchange (NYMEX) under the ticker symbol TT. They are delivered every year in March, May, July, October, and December.^[95]
  

Critical temperatures

• Favorable travel temperature range: below 25 °C (77 °F)


• Optimum travel temperature: 21 °C (70 °F)


• Glow temperature: 205 °C (401 °F)


• 
  Fire point: 210 °C (410 °F)


• 
  Autoignition temperature: 360 °C (680 °F) - 425 °C (797 °F)^[96]
  


• Autoignition temperature (for oily cotton): 120 °C (248 °F)

A temperature range of 25 to 35 °C (77 to 95 °F) is the optimal range for mold development. At temperatures below 0 °C (32 °F), rotting of wet cotton stops. Damaged cotton is sometimes stored at these temperatures to prevent further deterioration.^[97]

Egypt has a unique climatic temperature that the soil and the temperature provide an exceptional environment for cotton to grow rapidly.

British standard yarn measures

• 1 thread = 55 in or 140 cm


• 1 skein or rap = 80 threads (120 yd or 110 m)


• 1 hank = 7 skeins (840 yd or 770 m)


• 1 spindle = 18 hanks (15,120 yd or 13.83 km)

Fiber properties

Cotton fibers viewed under a scanning electron microscope

The chemical composition of cotton is as follows:

• 
  cellulose 91.00%


• 
  water 7.85%


• 
  protoplasm, pectins 0.55%


• 
  waxes, fatty substances 0.40%


• mineral salts 0.20%

Genome

This article may be too technical for most readers to understand. Please help improve it to make it understandable to non-experts, without removing the technical details. (January 2011) (Learn how and when to remove this template message)

There is a public effort to sequence the genome of cotton. It was started in 2007 by a consortium of public researchers.^[98] Their aim is to sequence the genome of cultivated, tetraploid cotton. "Tetraploid" means that its nucleus has two separate genomes, called A and D. The consortium agreed to first sequence the D-genome wild relative of cultivated cotton (G. raimondii, a Central American species) because it is small and has few repetitive elements. It has nearly one-third of the bases of tetraploid cotton, and each chromosome occurs only once.^{[clarification needed]} Then, the A genome of G. arboreum would be sequenced. Its genome is roughly twice that of G. raimondii. Part of the difference in size is due the amplification of retrotransposons (GORGE). After both diploid genomes are assembled, they would be used as models for sequencing the genomes of tetraploid cultivated species. Without knowing the diploid genomes, the euchromatic DNA sequences of AD genomes would co-assemble, and their repetitive elements would assemble independently into A and D sequences respectively. There would be no way to untangle the mess of AD sequences without comparing them to their diploid counterparts.

The public sector effort continues with the goal to create a high-quality, draft genome sequence from reads generated by all sources. The effort has generated Sanger reads of BACs, fosmids, and plasmids, as well as 454 reads. These later types of reads will be instrumental in assembling an initial draft of the D genome. In 2010, the companies Monsanto and Illumina completed enough Illumina sequencing to cover the D genome of G. raimondii about 50x.^[99] They announced that they would donate their raw reads to the public. This public relations effort gave them some recognition for sequencing the cotton genome. Once the D genome is assembled from all of this raw material, it will undoubtedly assist in the assembly of the AD genomes of cultivated varieties of cotton, but much work remains.

See also

References

Further reading

• Beckert, Sven. Empire of Cotton: A Global History. New York: Knopf, 2014.


• Brown, D. Clayton. King Cotton: A Cultural, Political, and Economic History since 1945 (University Press of Mississippi, 2011) 440 pp.
  ISBN 978-1-60473-798-1
  


• Ensminger, Audrey H. and Konlande, James E. Foods and Nutrition Encyclopedia, (2nd ed. CRC Press, 1993).
  ISBN 0-8493-8980-1
  


• USDA – Cotton Trade


• 
  Moseley, W.G. and L.C. Gray (eds). Hanging by a Thread: Cotton, Globalization and Poverty in Africa (Ohio University Press and Nordic Africa Press, 2008).
  ISBN 978-0-89680-260-5
  


• Riello, Giorgio. Cotton: The Fabric that Made the Modern World (2013) excerpt
  


• Smith, C. Wayne and Joe Tom Cothren. Cotton: origin, history, technology, and production (1999) 850 pages


• True, Alfred Charles. The cotton plant: its history, botany, chemistry, culture, enemies, and uses (U.S. Office of Experiment Stations, 1896) online edition
  


• Yafa, Stephen H. Big Cotton: How A Humble Fiber Created Fortunes, Wrecked Civilizations, and Put America on the Map (2004) excerpt and text search; also published as Cotton: The Biography of a Revolutionary Fiber. New York: Penguin USA, 2006. excerpt
  

External links

Wikimedia Commons has media related to Cotton.

Look up cotton in Wiktionary, the free dictionary.

Wikiquote has quotations related to: Cotton

• International Cotton Association


• National Cotton Council News and Current Events


• 
   "Cotton". New International Encyclopedia. 1905.
  


• 
   "Cotton". Encyclopædia Britannica. 7 (11th ed.). 1911. pp. 256–281.
  


• 
   "Cotton". Collier's New Encyclopedia. 1921.